GroutPro Silicone Finishing Fluid – Neutral Cure

GroutPro Silicone Finishing Fluid – Neutral Cure

Silicone Finishing Fluid-N for neutral cure silicone finishing. Not to be used with Acetic Cure silicones. Silicone Finishing Fluid-N is used to aid the professional application of silicone sealers. It is safe to use on marbles and natural stone products.

DIRECTIONS

1- Remove all grout, sealant or other residues from joint area. Sweep or vacuum joint to remove any loose dirt.

2- Wipe over with cloth dipped in isopropanol alcohol to remove final dust from surface. For maximum adhesion surface must be clean, dry and sound.

3- Fill joint with silicone sealant. Spray a light mist of Finishing Fluid over the silicone leaving the last 2cm free. This allows the next section of silicone to adhere to the last.
4- Use applicator, frequently dipped in Finishing Fluid, to remove excess silicone and form a smooth neat joint without the need for masking tape.

5- For the final touch-up use your finger, dipped in Finishing Fluid, to lightly smooth over the joint for that professional looking finish


FIRST AID

Eye Contactc: If irritation occurs, flush with warm running water for at least 15 minutes. Seek medical attention if irritation becomes painful.

Ingestion: If product is swallowed,
DO NOT induce vomiting. Rinse mouth repeatedly with water and give some water to drink. Seek medical attention if symptoms develop.

Inhalation: If inhaled and irritation occurs and becomes painful, seek medical attention.

Skin Contact: Wash skin with soap and water if irritation occurs.

• HARMFULL IF INGESTED.
• AVOID DIRECT INHALATION.
• STORE IN A COOL DRY PLACE.

For further information about professional application of this or any of GroutPro’s range of specialist tile & grout restoration products, please call 1800 822 459 or visit www.groutpro.com.au

WARNING

KEEP OUT OF REACH OF CHILDREN

Statement of Hazardous Nature This product is classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria. UN Number: None allocated Signal word: NONE.