GroutPro Prosolve is a highly concentrated mix of acids that has been engineered to remove, rust, calcium, scale & lime deposits. Excellent as a efflorescence remover it also is efficient on grout & cement residue. Highly economical, it dilutes from 4 :1 to 100 : 1 It also contains detergents to remove oil contamination from the surface being treated.
Dilute to required level. Apply liberally to surface being treated. Scrub area with an acid resistant scrubbing brush or cleaning pad. Promptly rinse thoroughly with clean water. Repeat if required.
Care: Prosolve may etch some surfaces. Avoid prolonged contact. Always test before use. Caution: Prosolve will etch & damage aluminium, zinc & other soft alloys as well as concrete, cement, terrazzo & ALL NATURAL STONE. Do not allow Prosolve to come in contact with these surfaces.
EXTRA HEAVY DUTY CONCENTRATED ACID. not suitable for use as a maintenance product, must be diluted with clean water before use.
STORE IN A COOL DRY PLACE.
NEVER MIX PROSOLVE WITH OTHER CHEMICALS ESPECIALLY CHLORINE AS THIS MAY PRODUCE TOXIC CHLORINE GAS.
Swallowed: If patient is fully conscious, give a glass of water. DO NOT induce vomiting. Rinse mouth repeatedly seek medical attention immediately. Eye: immediately flush with running water for at least 15 minutes. Seek medical attention. Skin: remove contaminated clothing. Wash skin with soap and water. If irritation persists seek medical attention. Inhalation: remove victim from exposure. Ensure victim is breathing, if breathing is laboured give oxygen. Seek medical attention immediately.
For further information about this or any of GroutPro’s products, please call 1800 822 459 or visit www.groutpro.com.au
KEEP OUT OF REACH OF CHILDREN