Pro Scrub is a Professional Grade Abrasive Cleaner that Dissolves ground in dirt & surface stains from most surfaces.
- Effective on most Stone. Tile & Masonry Surfaces
- Removes light grout haze (including epoxy)
- Breaks down & removes light mineral deposits
- Non toxic
- Removes factory applied waxes & floor finishes
- Cleans up with cold water
- Low VOC
GroutPro Pro Scrub is a mild abrasive cleaner designed to work where other cleaners won’t. Nano sized abrasive polishing particles combined with anionic & non-anionic surfactants work to gently scour away soiling & staining from the surface being cleaned. It rapidly attacks soiling & stains. Containing no chlorine or acids it’s is safe to use on most surfaces including most natural stone. Excellent factory wax remover it also removes light grout haze (including epoxy) & mineral deposits. Rinse free with no residue.
Effective on most ceramic, porcelain, enamel & other hard surfaces including chrome & stainless steel. Pro Scrub should not be used on soft metals such as aluminium & other easily scratched surfaces such as acrylic & fibreglass.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation persists. Swallowed: Do not induce vomiting. Get medical attention. Never give anything by mouth to an unconscious person. Skin Contact: Remove contaminated clothing and launder before re-use. Wash with soap and water. Get medical attention if irritation persists.
Pre-test Pro Scrub in an inconspicuous area. Make sure there is no change in gloss or colour occurs. Always protect neighbouring surfaces including wood, carpet & other soft surfaces. Clean surface to be treated using only GroutPro approved cleaning products to remove surface contaminants. If the surface is wet apply Pro Scrub direct to the surface being cleaned (if dry, lightly wet the area) using a soft pad (white or red) gently scrub the surface avoiding hard rubbing in the one spot. Alternatively, apply Pro Scrub to a damp soft pad & apply to the surface. If the surface is dry lightly mist with water. Wipe the surface clean & then rinse down with cold water. If using Pro Scrub on stainless steel always rub in the direction of the grain. Always shake the bottle well to mix the contents before use. For full facts & application methods refer to the Pro Scrub product fact sheet & application guide.
For further information about professional application of this or any of GroutPro’s range of specialist tile & grout restoration products, please call 1800 822 459 or visit www.groutpro.com.au