GroutPro Pro Scrub 5 litre

GroutPro Pro Scrub 5 litre

$96.53 Including GST

GroutPro Pro Scrub – 5 Litre

Pro Scrub is a mild abrasive cleaner designed to gently scour away soiling and staining from the surface being cleaned.

Suitable for – most ceramic, porcelain, enamel, chrome, stainless steel and other hard surfaces.

Pro Scrub should not be used on soft metals such as aluminium as well as other easily scratched surfaces, such as acrylic and fibreglass.

In stock

SKU: P-PROSCRUB-5L Category: Tags: , ,

GroutPro Pro Scrub

Pro Scrub is a Professional Grade Abrasive Cleaner that Dissolves ground in dirt and surface stains from most surfaces.

  • Effective on most Stone. Tile and Masonry Surfaces.
  • Removes light grout haze (including epoxy).
  • Non-acidic.
  • Breaks down and removes light mineral deposits.
  • Non toxic.
  • Removes factory applied waxes and floor finishes.
  • Cleans up with cold water.
  • Non-flammable.
  • Low VOC.

DESCRIPTION

GroutPro Pro Scrub is a mild abrasive cleaner designed to work where other cleaners won’t. Nano sized abrasive polishing particles combined with anionic and non-anionic surfactants work to gently scour away soiling and staining from the surface being cleaned. Containing no chlorine or acids it’s is safe to use on most surfaces, including most natural stone. Excellent factory wax remover it also removes light grout haze (including epoxy) and mineral deposits. Rinse free with no residue.

USES

Effective on most ceramic, porcelain, enamel as well as other hard surfaces including chrome and stainless steel.

Pro Scrub should not be used on soft metals such as aluminium and other easily scratched surfaces, such as acrylic and fibreglass.

DIRECTIONS

1 – Pre-test Pro Scrub in an inconspicuous area. Make sure there is no change in gloss or colour occurs.

2 – Always protect neighbouring surfaces including wood, carpet and other soft surfaces. Clean surface to be treated using only GroutPro approved cleaning products to remove surface contaminants.

3 – If the surface is wet apply Pro Scrub direct to the surface being cleaned (if dry, lightly wet the area). Using a soft pad (white or red) gently scrub the surface, avoiding hard rubbing in the one spot.

Alternatively, apply Pro Scrub to a damp soft pad and apply to the surface (if dry, lightly wet the area). Wipe the surface clean and then rinse down with cold water.

If using Pro Scrub on stainless steel always rub in the direction of the grain. Always shake the bottle well to mix the contents before use.

 

For full facts & application methods refer to the Pro Scrub product fact sheet & application guide.

­FIRST AID

Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation persists.

Ingestion: Do not induce vomiting. Get medical attention. Never give anything by mouth to an unconscious person.

Skin Contact: Remove contaminated clothing and launder before re-use. Wash with soap and water. Get medical attention if irritation persists.

DANGER

KEEP OUT OF REACH OF CHILDREN

For further information about professional application of this or any of GroutPro’s range of specialist tile & grout restoration products, please call 1800 822 459 or visit www.groutpro.com.au

 

Statement of Hazardous Nature

This product is classified as: hazardous according to the criteria of SWA.
Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.
SUSMP Classification: None allocated.
ADG Classification: None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG)
Code, IATA or IMDG/IMSBC criteria.
UN Number: None allocated

DANGER

ACTIVE INGREDIENTS
Calcium Carbonate 30<60%
NonIonic Detergents <5%
Sodium Carbonate <10%

SDS Info Sheet Download

 

Additional information

Weight 5 kg
Dimensions 13 × 18 × 30 cm