Actisorb- Stain Absorber

Actisorb- Stain Absorber

$50.49 Including GST

Treatment of Tough Surface Stains, Porcelain Wax and Grout Residue. pH neutral, safe for use on all fine stone, tiles, grout and concrete.

In stock

SKU: P-ACTISORB-STAIN-REMOVER Category:

Actisorb- Stain Absorber

Actisorb Stain Absorber – Treatment of Tough Surface Stains, Porcelain Wax and Grout Residue.

Actisorb is a fine white/grey powder with incredible absorption properties. Actisorb is used in cleaning and restoration of stone surfaces. Actisorb is safe for use on all man-made and
natural stone, tiles and grout. Use Actisorb to lift deep set stains and oils from fine stone and masonry surfaces.

BENIFITS

• Conveniently Versatile – Actisorb is an inert, neutral absorption powder and can be mixed with any cleaning liquid to form a poultice. Compatible with solvents and alkalis.
• Substrate Safe – Actisorb is safe to use on all tile, stone, grout, masonry and cement surfaces, including sensitive polished granite, marble and limestone.
• A Cleaning Booster – Specialty non-scratch abrasives are included for additional cleaning power on grout haze cleaning, porcelain wax removal and tough soil build ups.

SAMPLE TESTING

Always test first according to directions to determine desired results.

DIRECTIONS FOR ACTISORB

Poultice Form:
1. Mix Actisorb with POG to form a toothpaste consistency paste.
2. Cover oil stain with a 10 – 15mm thick layer of Actisorb/POG poultice.
3. Allow to sit for a minimum of 2 hours or until dry. Cover with plastic or similar to prevent direct exposure to sunlight and to prolong drying times.
4. Rinse or brush away.

Scourer Use:
1. Mix Actisorb with T&G Cleaner Pro to form a wet paste.
2. Use this paste to remove grout smear, cement, residues or tough, compacted grime build-ups. Scrub with a nylon pad.
3. Rinse well with water after use.
4. Alternatively; apply the relevant cleaning solution to the floor area concerned and sprinkle sufficient Actisorb onto the area to form a slurry. Agitate using a low speed scrubber using a red pad or brush. Extract the slurry and rinse well with water.

FIRST AID

If in contact with eyes, it can causes serious eye irritation. If in eyes: rinse cautiously with water for several minutes. If eye irritation persists, get medical attention.

Avoid release to the environment. Wear protective gloves and eye protection.

Keep out of reach of children

Additional information

Weight 0.35 kg
Dimensions 10 × 10 × 17 cm