GroutPro ProEnhance – 20 Litre

GroutPro ProEnhance – 20 Litre

$1,012.00 Including GST

GroutPro ProEnhance penetrating and enhancing sealer – 20 Litre

ProEnhance is designed for the protection of all stone and porous masonry surfaces. GroutPro ProEnhance forms a barrier that is resistant to moisture and stains while enriching the colour of the surface it is applied to.

  • All Stone and Masonry Surfaces • Interior and Exterior
  • Non Coating and Yellowing • Resists biological damage
  • Protection against spalling, cracking and efflorescence
  • Low Toxicity • VOC Free • Highly Stain Resistant
  • Chemically and Physically bonds to substrate

In stock

SKU: P-PROENHANCE-20L Category:

GroutPro ProEnhance

GroutPro ProEnhance is a unique sealer designed for the protection of all stone and porous masonry surfaces. GroutPro ProEnhance forms a barrier that is resistant to moisture and stains while enriching the colour of the surface it is applied to. GroutPro ProEnhance can be used on both interior and exterior surfaces.

  • All Stone and Masonry Surfaces • Interior and Exterior
  • Non Coating and Yellowing • Resists biological damage
  • Protection against spalling, cracking and efflorescence
  • Low Toxicity • VOC Free • Highly Stain Resistant
  • Chemically and Physically bonds to substrate

This product is READY TO USE – DO NOT DILUTE

DIRECTIONS

Always protect neighbouring surfaces including wood, carpet, metal, landscaping and other non-masonry surfaces.

1 – Clean surface to be treated using only GroutPro approved cleaning products. Apply sealer evenly using a speed brush, lambs wool pad or short nap roller. Apply enough to wet the surface thoroughly.

2 – Allow GroutPro ProEnhance to dwell for 5 to 15 minutes (depending on the substrate) to insure maximum penetration. Do not allow the sealer to dry out during the application process (re-apply if necessary). Excess sealer must be removed with clean dry cloth before it dries.

3 – Finished area can be used for light foot traffic when dry (approx. 4 hours). A second application may be necessary for some surfaces.

For optimum results, finished area must be kept dry and free from staining materials for 24-72 hours depending on the application.

Note: GroutPro ProEnhance may leave the surface with a very slight sheen when viewed in certain lighting conditions. Refer to the GroutPro ProEnhance fact sheet and application guide for further information.

COVERAGE

Coverage will vary depending on density, porosity, texture, weather, time solution is left on surface and application methods. Refer to the GroutPro Sealer coverage guide for further information.

FIRST AID

Eye Contact: Immediately flush with running water for at least 15 minutes. Seek medical attention.

Ingestion: Do not induce vomiting. Get medical attention. Never give anything by mouth to an unconscious person.

Skin Contact: Remove contaminated clothing and launder before re-use. Wash with soap and water. Get medical attention if irritation persists.

SAMPLE TESTING

Always test first. User must determine the suitability of product for its intended use.

For further information about professional application of this or any of GroutPro’s range of specialist tile & grout restoration products, please call 1800 822 459 or visit www.groutpro.com.au

DANGER

KEEP OUT OF REACH OF CHILDREN

Statement of Hazardous Nature

This product is classified as: Hazardous according to the criteria of SWA.
Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.
SUSMP Classification: None allocated.
ADG Classification: None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG)
Code, IATA or IMDG/IMSBC criteria.
UN Number: None allocated

DANGER

Serious eye damage/eye irritation Category 1

SDS Info Sheet Download

 

Additional information

Weight 20 kg
Dimensions 30 × 30 × 27 cm

You may also like…